Zein and hydroxypropyl methylcellulose acetate succinate microfibers combined with metronidazole benzoate and/or metronidazole-incorporated cellulose nanofibrils for potential periodontal treatment.

The development of flexible and porous materials to control antibacterial delivery is a pivotal endeavor in medical science. In this study, we aimed to produce long and defect-free fibers made of zein and hydroxypropyl methylcellulose acetate succinate (HPMCAS) to be used as a platform for the release of metronidazole (MDZ) and metronidazole benzoate (BMDZ) to be potentially used in periodontal treatment. Microfibers prepared via electrospinning under a 2:3 (w/w) zein to HPMCAS ratio, containing 0.5 % (w/w) poly(ethylene oxide) (PEO) and 1 % (w/w) cellulose nanofibril (CNF) were loaded with 40 % (w/w) MDZ, 40 % (w/w) BMDZ, or a combination of 20 % (w/w) of each drug. The addition of CNF improved the electrospinning process, resulting in long fibers with reduced MDZ and BMDZ surface crystallization. MDZ- and BMDZ-incorporated fibers were semicrystalline and displayed commendable compatibility among drugs, nanocellulose and polymeric chains. Release tests showed that zein/HPMCAS/PEO fibers without CNF and with 20 % (w/w) MDZ/ 20 % (w/w) BMDZ released the drug at a slower and more sustained rate compared to other samples over extended periods (up to 5 days), which is a favorable aspect concerning periodontitis treatment.

The Potential of Films as Transmucosal Drug Delivery Systems.

Pharmaceutical films are polymeric formulations used as a delivery platform for administration of small and macromolecular drugs for local or systemic action. They can be produced by using synthetic, semi-synthetic, or natural polymers through solvent casting, electrospinning, hot-melt extrusion, and 3D printing methods, and depending on the components and the manufacturing methods used, the films allow the modulation of drug release. Moreover, they have advantages that have drawn interest in the development and evaluation of film application on the buccal, nasal, vaginal, and ocular mucosa. This review aims to provide an overview of and critically discuss the use of films as transmucosal drug delivery systems. For this, aspects such as the composition of these formulations, the theories of mucoadhesion, and the methods of production were deeply considered, and an analysis of the main transmucosal pathways for which there are examples of developed films was conducted. All of this allowed us to point out the most relevant characteristics and opportunities that deserve to be taken into account in the use of films as transmucosal drug delivery systems.

Integration of artificial neural network and physiologically based biopharmaceutic models in the development of sustained-release formulations.

Model-informed drug development is an important area recognized by regulatory authorities and is gaining increasing interest from the generic drug industry. Physiologically based biopharmaceutics modeling (PBBM) is a valuable tool to support drug development and bioequivalence assessments. This study aimed to utilize an artificial neural network (ANN) with a multilayer perceptron (MLP) model to develop a sustained-release matrix tablet of metformin HCl 500 mg, and to test the likelihood of the prototype formulation being bioequivalent to Glucophage® XR, using PBBM modeling and virtual bioequivalence (vBE). The ANN with MLP model was used to simultaneously optimize 735 formulations to determine the optimal formulation for Glucophage® XR release. The optimized formulation was evaluated and compared to Glucophage® XR using PBBM modeling and vBE. The optimized formulation consisted of 228 mg of hydroxypropyl methylcellulose (HPMC) and 151 mg of PVP, and exhibited an observed release rate of 42% at 1 h, 47% at 2 h, 55% at 4 h, and 58% at 8 h. The PBBM modeling was effective in assessing the bioequivalence of two formulations of metformin, and the vBE evaluation demonstrated the utility and relevance of translational modeling for bioequivalence assessments. The study demonstrated the effectiveness of using PBBM modeling and model-informed drug development methodologies, such as ANN and MLP, to optimize drug formulations and evaluate bioequivalence. These tools can be utilized by the generic drug industry to support drug development and biopharmaceutics assessments.

Needle-free anesthetic polymeric device for dental anesthesia in children: A randomized clinical trial.

PURPOSE: To evaluate efficacy of an anesthetic mucoadhesive film with a polymeric device (PD) in promoting anesthesia compared to conventional local infiltration (LA) in children. METHODS: 50 children aged 6-10 years (both genders) needing similar procedures on homologous teeth on the maxilla were included. The parents and children were asked about perception of dental treatment. The child's heart rate per minute (bpm) and blood pressure were evaluated before and after each anesthetic technique (AT) procedure. Anesthesia efficacy was measured by reporting pain using Wong-Baker Faces Scale. Children's behavior and AT preferences were also evaluated. Paired T-test, chi-square and Wilcoxon test were used for statistical comparisons. RESULTS: Fear of anesthesia was reported by 50% of caregivers and by 66% of children. No difference was observed in systolic (P= 0.282) and diastolic (P= 0.251) blood pressure, comparing both AT. Difference was observed regarding the child's behavior when the PD was used (P= 0.0028). Evaluating the face scale, 74% of the children selected the "no pain" (face 0) (P< 0.0001) for PD, and 26% for LA. PD was preferred by 86% of children. Only 20% of the PD anesthesia needed to be complemented by LA. CLINICAL SIGNIFICANCE: The polymeric device presented promising results since most children did not report pain and dental procedures could be performed without local infiltration.

Herpes Labialis: A New Possibility for Topical Treatment with Well-Elucidated Drugs.

Mucocutaneous infections caused by Herpes simplex virus (HSV-1 and HSV-2) are characterized by the appearance of vesicles that cause pain and embarrassment to the carrier. The standard treatment is based on the use of antivirals in gels or ointments, however, relapses are common. Local anesthetics decrease the pain caused by the lesion, in addition to showing antiviral properties. Semi-solid form facilitates application and its transformation into a thin film favors the maintenance of the formulation in place, with a more discreet final aspect. The objective of this study was to develop and evaluate formulations containing anesthetics for the treatment of cold sores. For this purpose, two semi-solid film-forming formulations were developed and evaluated, containing HPMC K100, lidocaine (LIDO) and prilocaine (PRILO) combined with adjuvants, in the presence (F1T) or not (F1) of the absorption promoter Transcutol®. The mixture of PRILO and LIDO resulted in the formation of a eutectic mixture (EM), essential for penetration of drugs into the skin. The quantification of drugs was performed by HPLC (High Performance Liquid Chromatography), and Transcutol® did not influence the release of drugs from the formulation. The bioadhesiveness of the formulation was evaluate and the drugs did not impair the adhesive potential of the polymers used. The formulations were evaluated in vivo for skin irritation and did not show any negative sign on macroscopic examination. The in vivo efficacy test proved the anesthetics' ability to decrease the lesions caused by HSV-1. Thus, the proposed formulations proved to be good alternatives to the treatment of oral lesions caused by HSV-1.

Towards the advance of a novel iontophoretic patch for needle-free buccal anesthesia.

The aim of this work was to develop a mucoadhesive iontophoretic patch for anesthetic delivery in the buccal epithelium. The patch was comprised of three different layers, namely i) drug release (0.64 cm2); ii) mucoadhesive (1.13 cm2); and iii) backing (1.13 cm2). Prilocaine and lidocaine hydrochlorides were used as model drugs (1:1 ratio, 12.5 mg per unit). An anode electrode (0.5 cm2 spiral silver wire) was placed in between the drug release and mucoadhesive/backing layers to enable iontophoresis. Surface microscopy; mechanical and in vitro mucoadhesive properties; drug release kinetics and mechanism; and drug permeation through the porcine esophageal epithelium were assessed. Topographic analysis evidenced differences in the physical structures for the several layers. All layers presented suitable handling properties i.e., flexibility, elasticity and resistance. Both the release and mucoadhesive layers presented features of a soft and tough material, while the backing layer matched the characteristics of a hard and brittle material. A synergy between the drug release and mucoadhesive layers on the mucoadhesive force and work of adhesion of the tri-layered patch was observed. Passive drug release of both drugs fitted to First-order, Hixson-Crowell and Weibull kinetic models; and the release mechanism was attributed to anomalous transport. Iontophoresis remarkably enhanced the permeation of both drugs, but mainly prilocaine through the mucosa as evidenced by the permeability coefficient parameter (3.0-fold). The amount of these amino amide salts retained in the mucosa were also equally enhanced (4.7-fold), while the application of a tiny constant electric current (1 mA·cm-2·h-1) significantly decreased the lag time for lidocaine permeation by about 45%. In view of possible in vitro / in vivo correlations, the buccal iontophoretic patch displays a promising strategy for needle-free and patient-friendly local anesthesia in dentistry.

A New Approach to Ex Vivo Permeation Studies in In-Situ Film-Forming Systems.

The skin is the largest human organ and an important topical route. Even with some challenges, it is an important ally in medication administration, mainly because it is painless and easy-to-apply. Semisolid formulations are the most used dosage forms for drug administration via this delivery route and can be optimized when transformed into a film, favoring on-site maintenance, and promoting drug permeation. However, in situ film-forming systems are difficult to assess and characterize using Franz-type diffusion cells once this apparatus is ideal to formulations without transition phases. The present study proposed a different method to characterize these formulations and provide complementary data on drug and penetration enhancer behaviors, as close as possible to real application conditions. This characterization method allowed us to analyze drug concentration on three necessary occasions: remaining in the polymer film, stratum corneum using adhesive tape, and skin to check where drugs will have a desirable effect. As a proof-of-concept, the proposed ex vivo permeation method was used to evaluate a film-forming system containing lidocaine and prilocaine. We could also evaluate transition phases of drug compositions and quantify drugs at key times after application. Hence, the developed method may be used to provide complementary data to the Franz diffusion cell method, in terms of drug and penetration enhancer behaviors incorporated into film-forming delivery systems.

Local anesthetic improves individuals affected with herpes simplex type 1 labialis.

Infections caused by the herpes simplex virus 1 (HSV-1), commonly called herpes simplex labialis (HSL), are a public health problem, reaching around 40% of the world's population. Thus, the search for effective therapeutic alternatives in the control of the limitations caused by this virus during the stages of evolution of the disease, is necessary, since they have a direct impact on the quality of life of the patients. The aim of the present study was to evaluate the efficacy of the in situ film precursor semisolid composition in the treatment of herpes simplex lesions in human HSV-1. Ninety-eight (n = 98) patients with HSV-1 were used for this study. The initial exclusion criteria left 81 patients to be considered in the present study. Three applications were performed, the first at time zero (T0) and the other two at 8 and 16 hours, after initial application (T8 and T16). Photographs were taken in the first appointment and 24 and 72 hours after the last application. After the three periods, each patient received a total amount of 90 mg of anesthetic and the prognosis of the patients was followed for 6 months and 1 year after the application. Frequency analysis showed that 40.3% of patients had remission of symptoms 24 hours after the last application. For the present study, the film presented a positive therapeutic potential and an esthetic benefit that is absent in the current products (ointments and gels). The invent presents dosage convenience (only three applications in a 24-hour period) and a low production cost, with a much shorter healing time than that reported using topical antiretrovirals.

Topical pilocarpine for xerostomia in patients with head and neck cancer treated with radiotherapy.

OBJECTIVE: To evaluate a pilocarpine spray as a treatment for xerostomia in patients treated with radiotherapy (RT) for head and neck cancer (HNC). METHODS: This was a placebo-controlled, double-blind, crossover clinical trial of patients complaining of dry mouth after RT for HNC. Forty patients were randomly assigned to either placebo or pilocarpine (1.54%) spray and instructed to use three times a day for 3 months. After 1-month washout period, patients were crossed over to receive placebo or pilocarpine. The assessments were salivary flow (Stimulated Whole Saliva Flow - SWSF), xerostomia (Xerostomia Inventory - XI), and quality of life (QoL/Oral Health Impact Profile - OHIP-14), assessed at baseline, 1 hr (only SWSF), and at 1, 2, and 3 months of treatment. RESULTS: Posttreatment SWFS was not statistically different between pilocarpine and placebo regardless of the treatment sequence (paired T test; p > .05), except for the SWFS rates at 2 months after therapy. When comparing pilocarpine with placebo in the time points, there was no significant difference (p > .05) for QoL or XI. Significant differences in improvement in QoL and xerostomia experience appeared along time for pilocarpine group. CONCLUSION: The topical application of pilocarpine spray tested was similar to placebo on SWSF assessments in patients treated with RT for HNC.

Pharmacokinetics, Pharmacodynamics and Dermal Distribution of 5-Methoxypsoralen Based on a Physiologically Based Pharmacokinetic Model to Support Phytotherapy Using Brosimum gaudichaudii.

The treatment of vitiligo includes the combination of psoralens and ultraviolet type A exposure. Psoralens belong to a group of natural furanocoumarins that cause the skin to become sensitive temporarily to ultraviolet type A. The aim of this study was to develop a physiologically based pharmacokinetic model of 5-MOP from Brosimum gaudichaudii to support psoralen and ultraviolet type A therapy. A study of rats was used to establish and validate rat tissue distribution. The same chemical-specific parameters used in the rat model were also employed in the human model to project human pharmacokinetics. The highest exposures in the rats were in the brain and skin. Following a single dose of 1.2 mg/kg 5-MOP in humans, the model predicted a maximum concentration of 20 ng/mL and an area under the curve of 125 ng.h/mL, matching clinical results. The half-maximum melanogenesis concentrations in B16F10 cells were 29.5, 18.5, 11.5, and 6.5 ng/mL for synthetic 5-MOP, synthetic 5-MOP with ultraviolet type A, B. gaudichaudii alone, and B. gaudichaudii plus ultraviolet type A, respectively. Physiologically based pharmacokinetic model prediction in humans supported a once-every-two-day regimen for optimal melanin production. This type of framework can be applied to support strategies for dose selection and to investigate the impact of drugs on melanocyte recovery.

Synergy between surfactants and mucoadhesive polymers enhances the transbuccal permeation of local anesthetics from freeze-dried tablets.

We report on the advance of freeze-dried mucoadhesive orodispersible tablets (ODTs) loaded with prilocaine (PRC) and lidocaine (LDC) hydrochlorides, aiming to promote noninvasive buccal anesthesia. The influences of combining biocompatible polymers (pullulan and HPMC K100 LV) and a blend of surfactants (oleic acid, polysorbate 80 and propylene glycol) acting as chemical enhancers on the permeation of such drugs through the esophageal porcine epithelium and in vitro mucoadhesion were investigated. The ODTs were also characterized in terms of average weight, thickness, pH, drug content, in vitro release, thermal behavior and scanning electronic microscopy. A dissolution test showed fast drug release within one hour. The drug release data for all ODTs fitted first order. No significant influence of the type of mucoadhesive polymer on release was observed, while the drug release from ODTs decreased in the presence of chemical enhancers. For the ODT containing pullulan the drug release mechanism was anomalous transport, whist for all others it was case-II transport. A remarkable synergic effect between pullulan and chemical enhancers on the permeation flux, lag time, and permeability coefficient of both drugs, but mainly for PRC was observed. Pullulan together with permeation enhancers also substantially improved the work of mucoadhesion as compared to HPMC. In contrast, HPMC improved drug retention in the epithelium. The novel drug delivery platform achieved by combining a freeze-drying technique, mucoadhesive biocompatible polymers, and chemical permeation enhancers displayed an effective strategy for the transbuccal delivery of PRC and LDC that can be used to improve needle-free buccal anesthesia.

Microencapsulation of fish oil by casein-pectin complexes and gum arabic microparticles: oxidative stabilisation.

This study was aimed to microencapsulate fish oil (FO) in two biocompatible polymeric blends: gum arabic (GA)-maltodextrin (MD) and casein-pectin (CP)-MD. GA-MD microparticles and CP-MD microparticles were produced by spray-drying and complex coacervation and spray-drying, respectively. Encapsulation efficiency, particle size, moisture content, oxidative stability, and morphological properties were analysed. Encapsulation efficiencies of 51.2-56.8% (w/v) for GA and 64.7-67.9% (w/v) for CP preparations were found. GA particle sizes varied from 2 to 100 µm and from 2 to 120 µm for CP microparticles. Spherical forms with depressions in the topography of both systems were evidenced by scanning electron microscopy. Confocal microscopy evidenced surface oil on GA microparticles, corroborating encapsulation efficiency. CP was more efficient than GA to reduce oxidation, with maximum peroxide values (PVs) of 17.40 mmol/kg oil after 28 d at 40 °C/75% relative humidity (RH). Thus, CP is a promising biopolymeric blend for encapsulation of FO that provides protection against lipid oxidation.

Emamectin benzoate in tilapia: Alternative method for drug incorporation into feed and associated residual depletion study.

Due to the lack of regulated drugs for aquaculture, the present study considered specific issues relating to environmental and food safety aspects concerning the potential use of emamectin benzoate (EMA) in freshwater fishes such as tilapia (Oreochromis niloticus) - an important commercial fish species worldwide. The residual depletion of EMA (EMA-B1a) in fillet (muscle plus skin in natural proportions) of tilapia treated with a daily dose of 50 µg/kg BW during seven consecutive days was evaluated. To facilitate this, analytical methods for quantitation of EMA in fish feed and in fish fillet employing LC-MS/MS were developed and validated. To eliminate the risk of EMA leaching from feed into the aquatic environment during fish medication via oral administration, a promising procedure for drug incorporation into feed involving the coating of feed pellets with ethyl cellulose polymer containing EMA was evaluated. The medicated feed exhibited good homogeneity (CV < 2.1%) with negligible EMA release (< LOQ) when the medicated feed remained in the water for up to 20 min. Depletion study analysis revealed the highest EMA concentration obtained in fish fillet to be 13.3 ng/g. Therefore, under the employed rearing conditions of this study, the obtained results did not evidence requirement for a minimum withdrawal period to be proposed considering the maximum residue limit of 100 µg/g for fish muscle. In response to the well-recognized demands and need for new alternative veterinary drugs for use within aquaculture, this study offers impetus for consideration of EMA use in tilapia taking into account environmental contamination and food safety issues.

Combining amino amide salts in mucoadhesive films enhances needle-free buccal anesthesia in adults.

Needle-phobia is usually a great concern in dentistry, and the replacement of painful injections by patient-friendly needle-free topical formulations would bring several advantages in dental practice worldwide. In this pursuit, the effects of combining prilocaine hydrochloride (PCL) and lidocaine hydrochloride (LCL) in different proportions in mucoadhesive films on their in vitro permeation and retention through porcine esophageal mucosa was studied. Complementarily, the permeation and retention of isolated LCL was investigated. The in vitro model used for evaluating buccal anesthetic penetration and retention in buccal epithelium was validated. In addition, the feasibility of a novel in vivo model to evaluate the painful sensation due to puncture "needle-shaped" gum jaw of adults at shallow and deep levels was demonstrated. The in vivo clinical survey revealed the efficiency of the films, which had onset of anesthesia at 5min, peak of anesthetic effect within 15 and 25min and anesthesia duration of 50min after being placed in maxillary sites. The in vitro drug flux, permeability coefficient and retention in the epithelium significantly correlated with in vivo onset, peak and extent of shallow and deep anesthetic effect. At shallow level, the permeation of LCL has shown to be closely related to the onset of anesthesia, while the penetration of PCL has a significant impact in the peak of anesthetic effect. Concerning the deep level, the penetration of PCL is required to attain the onset of anesthetic effect. The total amount of drug retained in the epithelium showed to modulate the extent of both shallow and deep anesthesia. Thus, the combination of LCL and PCL in mucoadhesive films may offer dentists and their patients a safe improvement for pain management during dental procedures.

A critical review about methodologies for the analysis of mucoadhesive properties of drug delivery systems.

Mucoadhesion is a useful strategy for drug delivery systems, such as tablets, patches, gels, liposomes, micro/nanoparticles, nanosuspensions, microemulsions and colloidal dispersions. Moreover, it has contributed to many benefits like increased residence time at application sites, drug protection, increased drug permeation and improved drug availability. In this context, investigation into the mucoadhesive properties of pharmaceutical dosage forms is fundamental, in order to characterize, understand and simulate the in vivo interaction between the formulation and the biological substrate, contributing to the development of new mucoadhesive systems with effectiveness, safety and quality. There are a lot of in vivo, in vitro and ex vivo methods for the evaluation of the mucoadhesive properties of drug delivery systems. However, there also is a lack of standardization of these techniques, which makes comparison between the results difficult. Therefore, this work aims to show an overview of the most commonly employed methods for mucoadhesion evaluation, relating them to different proposed systems and using artificial or natural mucosa from humans and animals.

LC-MS/MS methods for albendazole analysis in feed and its metabolite residues in fish fillet and a leaching study in feed after an alternative procedure for drug incorporation.

This paper describes the development of analytical methods for the quantification of albendazole (ABZ) in fish feed and ABZ and its main known metabolites (albendazole sulfoxide, albendazole sulfone and albendazole aminosulfone) in fish fillet employing LC-MS/MS. In order to assess the reliability of the analytical methods, evaluation was undertaken as recommended by related guides proposed by the Brazilian Ministry of Agriculture for analytical method validation. The calibration curve for ABZ quantification in feed showed adequate linearity (r > 0.99), precision (CV < 1.03%) and trueness ranging from 99% to 101%. The method for ABZ residues in fish fillet involving the QuEChERS technique for sample extraction had adequate linearity (r > 0.99) for all analytes, precision (CV < 13%) and trueness around 100%, with CCα < 122 ng g-1 and CCß < 145 ng g-1. Besides, by aiming to avoid the risk of ABZ leaching from feed into the aquatic environment during fish medication via the oral route, a promising procedure for drug incorporation in the feed involving coating feed pellets with ethyl cellulose polymer containing ABZ was also evaluated. The medicated feed had good homogeneity (CV < 3%) and a lower release of ABZ (< 0.2%) from feed to water when the medicated feed stayed in the water for up to 15 min.

LC-MS/MS methods for sulfadimethoxine and ormetoprim analysis in feed and fish fillet and a leaching study for feed after alternative procedures for the incorporation of drugs.

This paper describes the method development for sulfadimethoxine (SDM) and ormetoprim (OMP) quantitation in fish feed and fish fillet employing LC-MS/MS. In order to assess the reliability of the analytical method, valuation was undertaken as recommended by guidelines proposed by the Brazilian Ministry of Agriculture. The calibration curve for the quantification of both drugs in feed showed adequate linearity (r > 0.99), precision (CV < 12%) and trueness ranging from 97% to 100%. The method for the determination of SDM and OMP residues in fish fillet involved a simple sample preparation procedure that had adequate linearity (r > 0.99), precision (CV < 16%) and trueness around 100%, with CCα < 100.2 ng g-1 and CCß < 100.4 ng g-1. With a goal of avoiding the risk of drug leaching from feed into the aquatic environment during fish medication via the oral route, different procedures for drug incorporation into feed were evaluated. Coating feed pellets with ethyl cellulose polymer containing the drug showed promising results. In this case, medicated feed released drugs to water at a level below 6% when the medicated feed stayed in the water for up to 15 min.

The cannabinoid beta-caryophyllene (BCP) induces neuritogenesis in PC12 cells by a cannabinoid-receptor-independent mechanism.

Beta-caryophyllene (BCP) is a phytocannabinoid whose neuroprotective activity has been mainly associated with selective activation of cannabinoid-type-2 (CB2) receptors, inhibition of microglial activation and decrease of inflammation. Here, we addressed the potential of BCP to induce neuritogenesis in PC12 cells, a model system for primary neuronal cells that express trkA receptors, respond to NGF and do not express CB2 receptors. We demonstrated that BCP increases the survival and activates the NGF-specific receptor trkA in NGF-deprived PC12 cells, without increasing the expression of NGF itself. The neuritogenic effect of BCP in PC12 cells was abolished by k252a, an inhibitor of the NGF-specific receptor trkA. Accordingly, BCP did not induce neuritogenesis in SH-SY5Y neuroblastoma cells, a neuronal model that does not express trkA receptors and do not respond to NGF. Additionally, we demonstrated that BCP increases the expression of axonal-plasticity-associated proteins (GAP-43, synapsin and synaptophysin) in PC12 cells. It is known that these proteins are up-regulated by NGF in neurons and neuron-like cells, such as PC12 cells. Altogether, these findings suggest that BCP activates trka receptors and induces neuritogenesis by a mechanism independent of NGF or cannabinoid receptors. This is the first study to show such effects of BCP and their beneficial role in neurodegenerative processes should be further investigated.

Asthma self-management model: randomized controlled trial.

Information for patients provided by the pharmacist is reflected in adhesion to treatment, clinical results and patient quality of life. The objective of this study was to assess an asthma self-management model for rational medicine use. This was a randomized controlled trial with 60 asthmatic patients assigned to attend five modules presented by a pharmacist (intervention group) and 59 patients in the control group. Data collection was performed before and after this 4-month intervention and included an evaluation of asthma knowledge, lifestyle, inhaler techniques, adhesion to treatment, pulmonary function and quality of life. An economic viability analysis was also performed. The intervention group obtained an increase in asthma knowledge scores of 58.3-79.5% (P < 0.001). In this group, there was also an increase in the number of individuals who practiced physical exercise (36-43%), in the number of correct replies regarding the use of inhalers, in the percentage of adherent patients, and in quality of life scores for all domains. We concluded that this asthma self-management model was effective in improving the quality of life of asthma patients.

Impact Assessment of Pharmaceutical Care in the Management of Hypertension and Coronary Risk Factors after Discharge.

INTRODUCTION: Almost 50% of the 17.5 million deaths worldwide from cardiovascular disease have been associated with systemic arterial hypertension (SAH). Into this scenario, Pharmaceutical Care (PC) has been inserted in order to improve the management of SAH and reduce its risks. OBJECTIVE: To evaluate the outcomes and healthcare assistance achieved after discharge of hypertension patients from the PC program. METHODS: This is a quasi-experimental study with historical controls. Retrospective data collection from 2006 to 2012 was begun in 2013 and included a PC program performed over one year. PC was performed in two basic units of the public health system in Ribeirão Preto-SP, Brazil, where the pharmacist followed up 104 hypertensive patients. The clinical indicators of systolic (SBP) and diastolic blood pressure (DBP), triglycerides, total-cholesterol, high and low density lipoprotein cholesterol were collected, as well as care indicators related to the number of consultations (basic, specialized and emergency care) and antihypertensive drugs used. The coronary risk of patients by the Framingham risk score was also calculated. For the analysis, the data were divided into three periods, 2006-2008 as pre-PC, 2009 as PC and 2010-2012 as post-PC. RESULTS: In the pre-PC period, 54.4%, 79.0% and 27.3% of patients presented satisfactory levels of SBP, DBP and total-cholesterol, respectively. In the post-PC period, the percentages were 93.0% for SBP and DBP [p <0.001] and 60.6% for total-cholesterol [p <0.001]. The average number of consultations per patient/year in primary care was 1.66 ± 1.43 and 2.36 ± 1.73, [p = 0.012]; and for emergency care was 1.70 ± 1.43 and 1.06 ± 0.81, [p = 0.002] in the pre-PC and post-PC periods, respectively. The pre-PC Framingham risk in the last year was 14.3% ± 10.6 and the average post-PC was 10.9% ± 7.9. CONCLUSION: PC was effective in the control of blood pressure and total-cholesterolafter discharge of the hypertensive patients from PC program.